Part Number Hot Search : 
LM3S8971 16LT1 58009 BYP35A4 SKKH91 68HC908 RA45H MX581JH
Product Description
Full Text Search
 

To Download F4653 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  advanced datasheet ver. 11 saw bandpass filter F4653 part no. F4653 features z rf bandpass filter for cdma450 rx. part z usable bandwidth 5mhz(462.5 mhz ~ 467.5 mhz) z high attenuation z no matching single-balanced operation ( single 50 ? / balance 100 ? ) z ceramic surface mounted device package ( 3.0 mm 3.0mm ) z rohs compliant package dimensions 4 5 61 2 3 1 2 3 6 5 4 i 4653 pin configurations 2 input 4 output (+) 6 output ( - ) 1, 3, 5 case ground dimensions shown are nominal in millimeters body : al 2 o 3 ceramic lid : kovar, ni plated terminations : au plating 0.3 ~ 1. 0 um, over a 1.27 ~ 8.89 um ni plating maximum ratings parameters unit minimum typical maximum operating temperature range c -30 25 85 storage temperature range c -40 - 85 power handling capability dbm - - 20 electrostatics sensitive device ( esd) rev. date 2006-04-05 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. dr4010-ps11 1/8
advanced datasheet ver. 11 saw bandpass filter F4653 part no. F4653 preliminary specifications minimum typical maximum unit center frequency ( fc ) - 465.0 - mhz insertion loss (in fc +/- 2.5 mhz) - 2.5 3.0 db amplitude ripple (in fc +/- 2.5 mhz) - 0.5 1.0 db vswr (in fc +/- 2.5 mhz) - 1.7 2.1 45 30 20 45 40 30 50 35 30 - - - - - - - - - db relative attenuation 0.3 mhz ~ 450.0 mhz 452.5 mhz ~ 457.5 mhz 485.0 mhz ~ 495.0 mhz 495.0 mhz ~ 1200 mhz 1200 mhz ~ 1500 mhz 1500 mhz ~ 2000 mhz amplitude imbalance | s31/s21 | ( in fc +/- 2.5 mhz) - 0.15 0.30 db phase imbalance ( ? s31 - ? s21 + 180 ) ( in fc +/- 2.5 mhz) - 2.0 2.5 temperature range (operational) -30 25 85 input rf power (in fc +/- 2.5 mhz) 20 dbm input/output impedance single 50 / balance 100 ohms notes : 1) all specifications are based on th e matching schematic shown below, measur ed by agilent network analyzer and full 3 port calibration. 2) electrical margin has been built into the design to accoun t for the variations due to temperature drift and manufacturing tolerances rev. date 2006-04-05 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. dr4010-ps11 2/8
advanced datasheet ver. 11 saw bandpass filter F4653 part no. F4653 matching schematic ( actual matching values may vary due to pcb layout and parasitics ) balanced output 100 input 50 marking configuration 1) i 2) 4653 3) 1) pad number 1 index 2) manufacturer name 3) marking number ink or laser marking available rev. date 2006-04-05 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. dr4010-ps11 3/8
advanced datasheet ver. 11 saw bandpass filter F4653 part no. F4653 typical performance ( at 25 ) rev. date 2006-04-05 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. dr4010-ps11 4/8
advanced datasheet ver. 11 saw bandpass filter F4653 part no. F4653 input / output vswr charts input / output smith charts rev. date 2006-04-05 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. dr4010-ps11 5/8
advanced datasheet ver. 11 saw bandpass filter F4653 part no. F4653 amplitude/phase imbalance rev. date 2006-04-05 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. dr4010-ps11 6/8
advanced datasheet ver. 11 saw bandpass filter F4653 part no. F4653 packing specification 1. reeling quantity : 3000 pcs / 13? reel ( or 1000 pcs / 7? reel ) 2. taping structure : the tape shall be wound ar ound the reel in the direction shown below. reel top cover tape carrier tape tape specification 1. leader part and vacant position specification end start tape running direction vacant 150mm min. component contained vacant 150mm min. leader part 250mm min. 2. tensile strength of carrier tape 4.4n/mm width 0~15 degree top cover tape direction of pull carrier tape 3. top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g rev. date 2006-04-05 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. dr4010-ps11 7/8
advanced datasheet ver. 11 saw bandpass filter F4653 part no. F4653 carrier tape dimensions [unit : mm] rev. date 2006-04-05 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. dr4010-ps11 8/8 a 3.40 0.1 b 3.40 0.1 c 7.25 0.1 d 1.70 0.1 e 12.00 0.1 f 8.00 0.1 part direction tape running direction reel dimensions [unit : mm]


▲Up To Search▲   

 
Price & Availability of F4653

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X